Showing results for 
Search instead for 
Do you mean 
Reply
14771128
Posts: 2
Registered: ‎08-17-2010

Repeater Setup

Hi

 

I have a problem setting up my WAP54G v3.1 as a repeater to my WRT54g v5.

 

I followed all the steps and read a lot on the web about similar problems. I have updated the firmversion on both devices. The only conern I have is that the version on the WRT54G is only 1.02.8 or simliar. It is however the latest version available from Cisco for the v5.

 

I do have the right MAC of the WRT54G for the WAP54G. I got it by looging onto the WRT54G and browsing to status. right I also have added the IP.

 

Can anyone help ?

 

Tanks

Expert
Expert
Posts: 12,649
Registered: ‎07-16-2006

Re: Repeater Setup

Do you really use the wireless MAC address and not the MAC address of the LAN or WAN interface. Each have different MAC addresses. Make a site survey from the WAP and it should show you the MAC address for the SSID of your WRT...
14771128
Posts: 2
Registered: ‎08-17-2010

Re: Repeater Setup

You were right. It was the WAN MAC I had entered. Gee I feel like an idiot now :-)

Thanks a lot !!