When I go into the set-up with the computer connected to the AP it just lets me name and enter an IP address. Then if I try to enter the set-up when the AP is connected to the Router it will not connect. Not sure Iif I am using the correct IP Address. I would also like to be able to enable security.
I made sure the AP IP was in the range of the router. When I set up the AP with the PC plugged direct to AP it just lets me name the AP and set IP address. Everything else I get a red circle with a line through it. The iI connect the AP to the router and try to connect to the AP IP address with PC connected to the router it won't connect. The wireless Laptop is working and get internet. But I can not get to the AP utilities to set up security. What am I doing wrong. Linksys tech support does not support this product.