05-30-2012 12:48 PM
im interested in buiyng wap54g v3.1 , to use as a repeater or as a acess point of the sagem fast 2604 router
as an acess ponit
i wish to use dinamic ip ,and in your guides i only see static ip settings. another option is tu use it as a wireless repeater
but i saw in your guides that only wors with your brand router. please help me to buy the right stuff..
05-30-2012 01:26 PM
there is actually an option to have the device obtain an IP from your router. just access the GUI using 192.168.1.245 and set configuration type to Automatic Configuration- DHCP.
note that if the router does not have a 192.168.1.x address, you will have to connect the AP to the PC directly to configure.
05-31-2012 04:12 PM
The Linksys Wireless-G Access Points can be configured as an Access Point, Access Point Client, Wireless Repeater, and Wireless Bridge. The Wireless Repeater mode will turn the access point into a wireless repeater to extend the range of your signal.
The WAP54G will work as a wireless repeater with the following devices:
To configure the access point as a wireless repeater, you need to perform two steps:
1) Checking the Wireless MAC Address of a Wireless Router/Access Point
2) Setting-Up Wireless Repeater Mode on the WAP54G
Here is the link for configuring an Access Point as a Wireless Repeater: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=