Showing results for 
Search instead for 
Do you mean 
Reply
rocker9455
Posts: 5
Registered: ‎08-05-2009
Accepted Solution

AG241 v2 Firemware upgrade, how do i do it?

Hello everyone,

Im having a bit of trouble, how am i supposed to update my router, i have DLed the tarballs from GPL and now im not sure how to update it, do i have to makefile? (im using ubuntu by the way which is handy if i have to build it!) and if i do have to makefile how do i do it!? sorry for the beginner question 

 

Thanks everyone,

Will 

rocker9455
Posts: 5
Registered: ‎08-05-2009

Re: AG241 v2 Firemware upgrade, how do i do it?

Please, anyone? im a bit lost here
Gollum
Posts: 2,517
Registered: ‎09-07-2006

Re: AG241 v2 Firemware upgrade, how do i do it?

If you upgrade the firmware of the Router on Ubuntu there is a possiblity that your router will be damaged.
rocker9455
Posts: 5
Registered: ‎08-05-2009

Re: AG241 v2 Firemware upgrade, how do i do it?

fine il just bring down the windows box, could you pass me on any instructions etc :smileyhappy:

 

cheers

Gollum
Posts: 2,517
Registered: ‎09-07-2006

Re: AG241 v2 Firemware upgrade, how do i do it?

Well to upgrade the firmware on your Router Follow this Steps.

 

Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop..

 

Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...(If you have changed the Router password, Use that password to login to the Router setup page).

Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".

Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

rocker9455
Posts: 5
Registered: ‎08-05-2009

Re: AG241 v2 Firemware upgrade, how do i do it?

I cant find the firmware package,is it on the GPL code page?  when i go to downloads and drivers all there is is a user guide

http://www.linksysbycisco.com/US/en/support/AG241/download

Gollum
Posts: 2,517
Registered: ‎09-07-2006

Re: AG241 v2 Firemware upgrade, how do i do it?

You can Download  from here...
rocker9455
Posts: 5
Registered: ‎08-05-2009

Re: AG241 v2 Firemware upgrade, how do i do it?

Thanks :smileyvery-happy: you have been very helpful :smileyvery-happy:
MMK89
Posts: 4
Registered: ‎01-06-2010

Re: AG241 v2 Firemware upgrade, how do i do it?

please i canot find the firmware in the download link please reupload it or tell me about the link
Waffler
Posts: 1
Registered: ‎05-02-2010

Re: AG241 v2 Firemware upgrade, how do i do it?

I just want to simply upgrade the firmware for my AG241.

I have wasted an hour going in circles on your website.  Is it such a big secret - this firmware file?  Where do you hide it and why do you make it so hard to find?

Try it yourself - just try to find firmware for the above model.  I can find instructions on how to do it, plus guides, bu no firmware,  but without the file, it's all academic.

Thank you

Simon