- last edited on
01-21-2007 11:01 AM
Hi… Here the screenshot for the Port Range Forwarding for you router. Login to this router with its IP address (default IP 192.168.1.1) in IE and setup the port forwarding. On the setup page, click on gaming and administration under which you will find port range forwarding.
You need to assign a static IP address on the computer for which you want to forward the ports. You cannot forward the same port for more than one computer. In that case you can use port triggering. Port Forwarding is used when you host any service from that computer. Port Triggering is used when you access any service on the computers behind the router.
01-22-2007 03:50 AM - edited 01-22-2007 03:50 AM
Message Edited by abb on 01-22-200706:56 AM
01-26-2007 06:22 PM
Hi… You don’t need to change the setup configuration of the router. Let it be automatic configuration DHCP. Go to Status and check the IP address. It should be different from 192.168.x.x. Check the DNS servers. Go to the PC you want to assign Static IP and assign a IP address as 192.168.1.x (where x is less than 100 or more than 149) with subnet and Default gateway (192.168.1.1) and DNS servers from the Status Page. Go to Setup page and do the port forwarding for this IP address. If you are not sure of the Protocol (TCP/UDP), select both and enable it. That’s it.
06-12-2008 10:15 PM