Reply
lothda
Posts: 3
Registered: ‎05-09-2007

No N Network connection with WAG120N

Please help with the following problem: when choosing "Mixed" or "N-only" as Network Mode on the Basic Wireless Settings configuration page, the mode resets to "B/G-Mixed" or "G-only" respectively when saving. In other words, it is not possible to use the N network mode. Thanks in advance.

saber_tooth
Posts: 2,653
Registered: ‎09-07-2006

Re: No N Network connection with WAG120N

I think you need to upgrade/re-flash the firmware on your router.

Connect the computer to the router with the Ethernet cable. Download the latest firmware from Linksys website and save it on your computer. Open the setup page of the router and upgrade the firmware on your router. After upgrading the firmware on your router, reset the router. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router and reconfigure it.

lothda
Posts: 3
Registered: ‎05-09-2007

Re: No N Network connection with WAG120N

Thank you, but I have the latest firmware version already (1.00.16). That's the one that has the problem.

anfjavid
Posts: 36
Registered: ‎08-05-2010

Re: No N Network connection with WAG120N

change wireless security to some other mode other than wep. For me it works in mixed mode with wpa2-psk...
lothda
Posts: 3
Registered: ‎05-09-2007

Re: No N Network connection with WAG120N

Thank you anfjavid, that solved the problem :smileyhappy: