Showing results for 
Search instead for 
Do you mean 
Reply
stimpak
Posts: 3
Registered: ‎05-01-2009

Precompiled 1.00.14 (Annex A) FW for wag160n

[ Edited ]

Oat found me in my regular forums, and asked for the 1.00.14 FW I uploaded there. I didn't realize that so many people were asking for it.

 

Anyway for those who are interested I compiled myself the 1.00.14 fw from the GPL code for my router - (its just for PSTN lines or annexA).

 

please note that its something i made for myself, and i cant guarantee that it will work for you. im not an official representative  of linksys or anything. I hope you unterstand that.

 

anyway here are the links:

 

link1

 

http://uploading.com/files/W9QQ19CQ/ACYHQ08-104-1014.bin.html

 

link2

 

http://hotfile.com/dl/3755772/98b3e07/ACYHQ08-104-1014.bin.html

 

the links, link to the same file and they're both for annexA, and im using v1 of the wag160n router

Message Edited by stimpak on 05-25-2009 10:30 AM
oat
oat
Posts: 9
Registered: ‎04-25-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Oh very thank you again stimpak

 

you help me a lot!

 

I tested it and it run smooth than older firmware but  it has problem with remote management (redirect to linksys search page.

 

Anyway you complie yourself that's make me feel better than before

 

Thank you!

MatthewMalik
Posts: 1
Registered: ‎05-28-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Man, you're a real life saver. I've waiting for ages for the new firmware. Finally a decent piece of code that make this device work perfectly. I was having the 1.00.12 problems so I returned my device and received a new one 1.00.9. That firmware was a bit stable, but I was having problems with my voip and my wirless range speed. It was not a constant 60mbit or 54 mbit.

 

Now with this version you compiled, its rock solid:smileywink:

 

Thanks m8.

 

Linksys should also put it up sooon!!!!.

elino45
Posts: 9
Registered: ‎02-02-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

I bought this gateway  about 8 months ago and I have never had an ADSL connection longer than 20 minutes then I swithed to another brand months ago. I tested 1.00.14 today and it's been more than 7 hours now and no ADSL dropout.:-)

no other issue tested since ADSL dropout was my main problem...

hope to see an official release soon

thanks to precompiler:-)

legendb
Posts: 7
Registered: ‎06-08-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Does this fix the wireless network disconnection issues?
legendb
Posts: 7
Registered: ‎06-08-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Right just installed it and looks ok so far.

 I was on v 1.00.07 of the firmware before.

 

 

It's fixed the name resolution on wireless devices so I can browse files on other machines, this may have been fixed in version 1.00.10 - not sure.

I have had the connection up for about 10 mins and the gateway is stable so far.

The main problem I was having was all clients disconnecting. I found it seemed to happen when media streaming from pc (wireless n) to ps3 (ethernet). Difficult to replicate precise conditions - It could go for hours before happening but I'll give it a couple of days of up time and see what happens. I'll post any findings as and when.

legendb
Posts: 7
Registered: ‎06-08-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

One other thing. My adsl connection is syncing at approx 5Mb/s,before the update it was 4Mb/s.
kkkong
Posts: 2
Registered: ‎06-09-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

[ Edited ]

Ver.1.00.14-ETSI (Annex A) Released offically in Linksys website :

 

http://www.linksysbycisco.com/APAC/en/support/WAG160N/download

 

Release Notes :

 

http://downloads.linksysbycisco.com/downloads/WAG160N-v1-1.00.15-AnnexB-release-note,0.txt

Message Edited by kkkong on 06-09-2009 12:34 AM
Message Edited by iamgiantherockstar on 08-21-2009 04:03 PM
rico.trevisan
Posts: 5
Registered: ‎08-30-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Wait, wait... what just happened here? Someone revives a thread about .14, kkkong posts somethings that gets edited and now it's referring to Linksys's official .14 yet linked to .15.

 

I guess that means that there's still no Bonjour fix...  :womansad:

Lowe
Posts: 2
Registered: ‎11-04-2009

Re: Precompiled 1.00.14 (Annex A) FW for wag160n

Hi, I am also experiencing the same wireless drop-off issues with my WAG160N V1 router (1.00.09) which 1.00.14 could fix except I live in Germany and need an Annex B version. Is there one and if not how do I create the firmware from the GPL version. Thanks in advance.