WAG120N Remote access

[meliorator]

Hello,

have problem with both of my wag120n routers. I setup remote access, from the intranet it works fine. But from internet instead of showing me the page it starts downloading it.  Instead of home page trying to save ¨download¨, if i put a long link like xxx.com/setup.cgi?=etc  then it tryes to save ¨setup.cgi¨. All fileas are empty, 7kbytes. Any ideas what it could be?

Best regards

[jaymay]

Is this the first time you're experiencing this problem or is remote access working before with both of your WAG120N? Are you using the latest firmware on your 2 gateways?

[meliorator]

One of the router just out of the box came like this, the other i updated straight away, so didnt had chance to check it, you can check it here

http://aqwa.dyndns.biz:8888/

[Jake_2.0]

Are you trying to configure remote desktop? Maybe you need to check on these links and check if it helps.

http://windows.microsoft.com/en-us/windows7/allow-remote-desktop-connections-from-outside-your-home-...

http://windows.microsoft.com/en-US/windows7/What-types-of-Remote-Desktop-connections-should-I-allow

[meliorator]

i tryed it on Windows, Ubuntu, Android. Same problem

[Jake_2.0]

Try to uncheck block annonymous internet request under the security tab.

[meliorator]

Already did. Nothing. With ot Without it is the same.

[earthmyrll120288]

If you are trying to access the setup page of the router remotely:

-- If you have a DDNS/Domain name, you need to configure the router for DDNS first and enable remote management via the router setup page. The port to access should be 8080 not 8888. Refer to the links below:

Setting-up DDNS Service on the Linksys ADSL Gateway

Enabling Remote Management on an ADSL Gateway

If what you're trying to do is remote access to a computer:

How to setup Remote Desktop When Using a Linksys Router