WAG120n Big issue [ Edited ]

[m4rcelpl]

I have Linksys WAG120N ans ADSL+ Network from Netia (Poland) Internet is working from cable (Ethernet) but in WiFi I have big issue. My setting:

http://www.dropbox.com/gallery/29115/1/Router?h=8b7950

My device who works fine:

iPhone 4

iPhone 3G

My device who don't connect to the WiFi network:

xbox360 (new edition black with build in WiFin adapter)

Asus Eee PC 1000H (Windows 7) witch WiFin

Xbox360 an Eee PC works only when i disable the Wireless Security ;/ i tried plenty option Wireless Configuration manual or Wi-Fi Protected Setup. I tried all Security Mode i works only when i disable/

Firmware Version:V1.00.16

I have another router from ISP Asmax 1004g And it's all devices are working properly on it.

[Ricewind]

Try to upgrade/re flash the firmware .

Connect the computer with the Ethernet cable to Linksys WAG120N .

Download the latest firmware and upgrade the firmware .

After upgrading the firmware,reset the WAG120N for 30 seconds and configure it manually again .

[m4rcelpl]

Thank you for your reply.

I did exactly as you write. Update the router and restart all settings. Unfortunately it did not help. "iPhone 3" and "iPhone 4" communicate with WiFi and work. Xbox 360 and Asus Eee pc  connect only when i  disable the "Security Mode ". Observed that, as I set WPA2-Personal is a computer connected only by using the "Wi-Fi Protected Setup " but after about a minute and is disconnected after a reboot again no connection. Repeat the computer is OK with a cheap router Asmax works without problems.

[helm]

Create a new wireless network and see if that works.

Connect the computer to the router with the Ethernet cable.

Open the setup page of the router and go to Wireless tab. Change the Wireless network name SSID to create a new wireless network. Change the wireless channel to 11. Save the settings.

Click on Wireless security sub tab and change the security mode to WEP. Enter the key for the wireless network. Click on Wireless MAC filter and make sure that it is disabled.

Click on Advanced wireless settings sub tab. Change the Beacon interval to 75, RTS and fragmentation threshold to 2304. Save the settings.

Try to connect to the new wireless network.

What error do you get when you try to connect to the wireless network?

Did you try connecting your wireless computer to any other secured wireless network?

[m4rcelpl]

"Create a new wireless network and see if that works." Done... even tried reflash (see above)

"Connect the computer to the router with the Ethernet cable" Done... I have PC Permanently connected cable and had no problem with the network

"Open the setup page of the router and go to Wireless tab. Change the Wireless network name SSID to create a new wireless network. Change the wireless channel to 11. Save the settings." Done... Not help

"Click on Wireless security sub tab and change the security mode to WEP. Enter the key for the wireless network. Click on Wireless MAC filter and make sure that it is disabled.

Click on Advanced wireless settings sub tab. Change the Beacon interval to 75, RTS and fragmentation threshold to 2304. Save the settings.

Try to connect to the new wireless network." Done... Not help

"What error do you get when you try to connect to the wireless network?" - I have Polish windows and I do not know how it is in English. In some settings after a network password. calls for "security key" and do not accept. And by setting WPA2 simply shows the message "Unable to connect to device"

"Did you try connecting your wireless computer to any other secured wireless network?" - see above I repeat:

PC - Connecting witch Ethernet cable - works

iPhone 3G (WiFi) - works on all the router settings

iPhone 4 (WiFi) - works on all the router settings

Netbook Asus EeePC 1000H Windows 7 (WiFi) - Don't works

Xbox 360 "slim" (WiFi) - Works only when setup to WPA-Personal, on WPA2 and Mixed Don't connect to device

When i disable wifi security All device works fine.

In another router ASMAX All device works fine.

-------------------------------------------------------------------

I try today all security settings I noticed something strange. Regardless of the network setting, the program inSSIDer shows the encryption WEP:

Screen was made ​​at the setting:

MAC Address:	00:25:9C:89:06:C0
Mode:	B/G-Mixed
Network Name (SSID):	iRouter
Radio Band:	Standard - 20MHz Channel
Wide Channel:
Standard Channel:	7- 2.442GHZ
Security:	WPA2
SSID Broadcast:	Enable

iRouter is the WAG120n which is the problem, pixels router is ASMAX which works without a problem, rest this is neighbors routers

And in the end some log file:

Sat, 2000-01-01 01:00:00 - Gateway start up

Sat, 2000-01-01 01:00:41 - Failed to get ip address for interface ppp0

Sat, 2000-01-01 01:00:44 - Adsl is connected

Sat, 2000-01-01 01:00:51 - Initialize LCP.

Sat, 2000-01-01 01:00:51 - Plugin pppoe loaded.

Sat, 2000-01-01 01:00:51 - PPPoE Plugin Initialized

Sat, 2000-01-01 01:00:51 - Plugin pppoe called.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - pppd 2.4.1 started by root, uid 0

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - DEBUG : setting line discipline hook

Sat, 2000-01-01 01:00:51 - Sending PADI

Sat, 2000-01-01 01:00:51 - HOST_UNIQ successful match

Sat, 2000-01-01 01:00:51 - Got connection: 97b

Sat, 2000-01-01 01:00:51 - Connecting PPPoE socket: 00:90:1a:a0:31:6f 097b nas0 0x1000d688

Sat, 2000-01-01 01:00:51 - using channel 1

Sat, 2000-01-01 01:00:51 - Using interface ppp0

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Connect: ppp0 <--> nas0

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_store.

Sat, 2000-01-01 01:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:51 - Enter: tdb_update.

Sat, 2000-01-01 01:00:51 - Couldn't increase MTU to 1500.

Sat, 2000-01-01 01:00:51 - Couldn't increase MRU to 1500

Sat, 2000-01-01 01:00:51 - LCP is allowed to come up.

Sat, 2000-01-01 01:00:51 - Couldn't increase MRU to 1500

Sat, 2000-01-01 01:00:51 - PAP authentication success

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_store.

Sat, 2000-01-01 01:00:52 - tdb_store: calling tdb_update.

Sat, 2000-01-01 01:00:52 - Enter: tdb_update.

Sat, 2000-01-01 01:00:52 - local IP address 87.205.88.2

Sat, 2000-01-01 01:00:52 - remote IP address 195.114.190.58

Sat, 2000-01-01 01:00:52 - primary DNS address 62.233.233.233

Sat, 2000-01-01 01:00:52 - secondary DNS address 87.204.204.204

Sat, 2000-01-01 01:01:31 - Send out NTP request to ntp.nasa.gov

Sat, 2011-06-11 11:44:29 - Receive NTP Reply from ntp.nasa.gov

[eduardobarth]

Hey buddy! I've been searching for the answer to your question for two days and all I could find was nothing. Hopefully, I think today I got the answer! Yes, its simpler than it looks and its a big linksy's **bleep**ing bad work.

As I don't have issue with another computer, my only problem is the Xbox360, I can't say if this will work for your notebook, but be sure it'll help you connecting to your Xbox.

Its just a firmware problem, man. Yeah, all this headache just for a **bleep**ing firmware problem. I paid attention on another website where was said that the WAG120N is fully compatible with the Xbox 360 wireless. And then was when I could see the tiny letters saying: "Firmware: 1.00.11". A click came to me: "Wow, I updated to 1.00.16 at Linksys website". It was so stupid I couldn't believe it would be my solution.

Well, I wen to linksys website and I found they don't let old firmwares to download. What should I do? Google it. Unfortunately, I wasnt able to find the 1.00.11 firmware version, I could just find the 1.00.12 which worked fine. Since I don't actually remeber where I downloaded it, i'll upload it to 4Shared so you'll be able to download it.

http://www.4shared.com/file/kY43xPZl/WAG120N_AnnexA_ETSI_FW_10012.html

Thats it buddy, hope it help you with your Xbox and Notebook. I just wanna say that now you may find another problem, my Xbox test conections went fine but there was a minnor problem when trying to connect to Xbox Live. The console said the NAT setting is moderated and it should be Open, the problem is that this modem/router doesn't have anything to change about NAT unless Able and Enable! Haha, it must be a **bleep**ing joke >_>

[m4rcelpl]

Thanks for your reply. I sent the router on the guarantee and sent me a new one. Nothing has changed, even the software WAG120N_AnnexA_ETSI_FW_1.00.12.bin.

(Mod Note: Edited for guideline compliance.)