Reply
khaled268
Posts: 1
Registered: ‎04-24-2012

WAG160N wireless problem

I have 2 modem router
1- WAG 320N
2- WAG 160 N

My problem is that the WAG 320N is selectable band so I set it on 5GHz to connect my laptop in a High speed transfering data wireless. But My mobile ( Iphone4 ) cannot conect with 5GHz, I should be 2.4 GHz
So, I connect ( WAG160N) as a router

It is working fine on my network and my mobile can connect it's 2.4 GHz wifi
But for the internet I can open only emails as a text only  ( missing the photos )

I think I miss something on the WAG160N setting

Can any body help me ???

forsaken
Posts: 2,800
Registered: ‎09-07-2006

Re: WAG160N wireless problem

Try the following steps: # Open up the browser and on the address bar type 192.168.1.1 that will open up the Gateway setup page. # Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page). Here is the link for determining and setting up the correct MTU size: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re... Then check the connectivity status.