12-24-2010 01:33 AM
I can't find a support page for my router (WAG160Nv2) and so, no way to get the latest firmware.
I could also not register the product as it was not the the list of availeble products and there seems to be no way to contact any kind of tech support. So I hope somebody can help me out.
Wel updating the firmware is probably nog going to help me with my problem,
I currently use mac adresses to protect my wireless network.
Now I bought a smartphone with WiFi but when I add its adress to the list and try to save the setting I get the error that the adress can't be a multicast adress. So anything I can do to make my wlan accept my phone?
Solved! Go to Solution.
12-25-2010 12:26 PM
Wireless MAC address filter is not a good way to protect your wireless network.
You can enable WPA/WPA2 wireless security on your network. Change the SSID. Disable the wireless MAC filter.
Try to connect to the new wireless network and see if that works.
Follow this link to download the firmware for WAG160N. Make sure that you have the correct model number and version number of your router.
11-26-2011 01:48 AM
11-27-2011 09:14 PM
Hi to all,
me 2 i have same problem i can't found firmware for my WAG160N V2 can any one help me please ??!
have you tried Scrooge post?
check this link and select version 2
11-28-2011 01:39 AM
Well on cisco www there is only 20.0.20 firmaware, which is somehow bugged and i need 20.0.17 which i can't find there, any other suggestions? =)