06-30-2009 03:27 AM
I've got a problem,
When I flashing WAG54G2 to the new firmware, I was have power cut off.
Now my router is not working.
Power LED and Internet LED is orange, DSL and Wireless is GREEN.
I try connected by wire cable, Link is up, but no IP address.
How I can recover(restore) my ADSL router?
Solved! Go to Solution.
07-01-2009 12:46 PM
You need to hard reset your Linksys Gateway...
To reset the Gateway press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Gateway, wait for 30 seconds and re-connect the power cable...Now check the lights...
Leave a computer connected to the Ethernet Port on the Gateway and check if you get a valid ip address -
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...If you get a valid IP Address then you should be able to re-configure your Gateway.
If you get an IP Address of 169.254.x.x then you should disable any firewalls, security softwares on the computer and check the IP Address, if you still get an invalid ip address then -
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0, Default Gateway - 192.168.1.1, click on Ok button to Save and Click on "Close" on main Properties window...
See if you get the above mentioned IP Address and ping the router - type ping 192.168.1.1 and press Enter, if you get 4 replies, then upgrade your router and re-configure it...See how things work for you...
07-02-2009 01:05 PM - edited 07-02-2009 01:25 PM
if you can not access to the router web page whit reset you can try use this recover tool it have in yet the 10.0.016 annex A
If you have any problem just ask on the topic we have in this Spanish forum ,don't care about use English on the forum ,me and friend will helps.We are working also on customs firms for the wag54g2 XD
this tools works under xp sp2 on vista and xp sp3 i dont have tested it yet.
I forget too on the readme on the zip the mode for enter in recover mode , for enter on recover mode yu must press reset buton and then plug the power on ther router wait over 3-5s and then release the reset button the router will be now on recover mode and rdy for get the packets from the tool,if yu wants another wag firmanware just remplace the file whit the extension .img for the ones yu wants.
10-26-2009 03:53 PM
Could someone help me please ??? I have this kind of problem : I have tried all the advices mentioned above and I have tried the tool for upgrade but nothing happened (I get the successfully installation message at the end of the upgrade too). I still have the lights on in my router (the power and the internet are red and the other lights are green).
There is some other advice ???
04-07-2010 03:19 PM
I am desperate with my WAG54G2:
- It disconnects all the time.
- The connection limit is about two rooms away not more. That is very low range.
- It drops the wi-fi from time to time.
What to do?
07-21-2010 09:59 PM
08-28-2010 08:04 PM - edited 08-28-2010 08:07 PM
I have Linksys Wag54g2 Annex A.
All Lights are green ( Wireless, Dsl & Internet); but I can't connect via my wireless router !!
Although my Linksys router is visible in network connections.
The strange thing is that was happened suddenly and during my wireless connection !!
Should I update the Firmware? Or what?