Hi there i've bought a wag120n and i have some problems. it's disconnecting randomly. i've tried to reset it but it seems do not reset (my settings are still there). anybody have solution to that?? ps i've the same line measurement problem of an other user and i wold like to find a way to flash the firmware hardly for example with tftp or something
Are you facing these problem on your Wired or Wireless Computer? To Reset your Router you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router...
i've follow your instruction but nothing..it seems it does'nt reset well (usually the default values oc vpi vci are 0 and 38) but there are still my values 8 and 35 after reset. the's a way to reflash firmware hardly???
i already followed this procedure mone than once but nothing changed....i wold try the tftp procedure but it doens't work...what can i do? ps i forgot one thing a week ago i tried to upgrade firmware of this router whit the firmware 1.00.08 annex b but it return me an error 2 times...after that i figured out that my router is annex a and the firmware on it is already up-to-date (1.00.07) i don't know if the disconnection problem there was before this or can be the wrong firmware the cause of the problem
Do not try to upgrade the router with wrong firmware,the router can damage...Try to reflash the router with the available firmware.After reflashing the same firmware,reset the router and reconfigure it from the scratch.
Hi. I have the same problem. Have anyone found a solution to that? I tried the advices from previous posts and there is no improvement... It's still disconnecting randomly. Thanks in advice
