http://192.168.1.1/

[sonick_d]

hi to all...
i have a serius promblem.i cant connect to the http://192.168.1.1/ because i dont know what is my username and password.not even admin works.can anyone help me in how i can find my username and my password?
sorry for my english,i'm greek...
thanks

[cyberdad]

push the resetbutton on the back of your modem/router and login witth
user: admin

pass: admin

This, if you forgot your pass ofcourse

Message Edited by cyberdad on 01-20-200706:01 AM

[monkey1872]

Cyberdad,

I have been having a problem with login and have been trying admin as both user and pass but it will not let me in, is there another combination that works?

[vinod_idea]

Hi Guys,

I'm S'pore and I have this problem as well.

It was working well for almost one year but then the WAG354G had a problem.

I had no choice but to reset the WAG354G, as switching on/off doesn't help either.

After the re-set, i can't access to the WAG354G's webpage through direct LAN connection. Cable is working as I have tested with other PCs.

I also checked that the WAG354G does not assign IP address to my PC anymore.

Still figuring it out.

I hope linksys is looking into this forum. Pls help us, Linksys.

If it works well from my side, will update you as well.

[vinod_idea]

Hi every1,

GREAT News!!!

My router works now. Was working on it throught out the day.

This what I have done :

* Press the reset button and hold it there for 30 secs.

* Once done, type http://192.168.1.1 in ur internet browser.

* userid : admin

  password : admin

* Carry on with your configuration.

Any enquires, pls post it here.

Cheers,

Vinod

[vinod_idea]

Oh yeah, 1 more important thing to take note.

I often looked at the router's LED to read what's happening.

That gave me some answers.

Pls check here.

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4276&p_created=11628...

For any other problems related to this product, pls search at

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_alp.php?p_sid=XPgNgJsi&p_lva=&p_li=&...

Pls let me know the outcome of your problem.

See ya,

Vinod

[vinod_idea]

How do I check the gateway's LEDs? What LEDs should normally be lit?

Check it out :

http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4284&p_created=11628...

[dzfire1102]

Here is the simple way to access your router. Type:

https://192.168.1.1

[watkins6878]

Hi All

I am tring to setup my WAG354G v2 and the power led is flashing all the time i have downloaded the updated firmware but i cant access the utility via http://192.168.1.1 have tried reset and reboot but not working is there anyother way to upgrade my firmware

Thanks in advanced

Alan

[dzfire1102]

Because there is a password involved, You MUST type in:

https://192.168.1.1

Make sure the "s" is on the end of the http.

This will get you in.