04-09-2012 06:53 PM
Everytime i connect my phone on my network the entire network freezes: the lights on the router stills on but there is no connection on the network. Anyone had any similar problem? There is anything that i can do to prevent it?
04-10-2012 09:02 PM
Try the following steps:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Gateway setup page.
# Click on the Wireless Tab and make the Channel Width to 20 MHz only and Channel to 1, 3, 6, 9, 11..
Then check the status..
Second, let me know the current firmware version in the router? Here is the link to check the firmware version: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=
04-11-2012 07:05 AM
My firmware is the lastest ( .16 version). I "solved" the problem changing the security to "WEP" and the network modem to B/G (no N). The problem did not occurred anymore and i can use all my devices normally but is a little sad have a feature (wireless N) that i can't use...
04-11-2012 07:16 AM
maximuscesar wrote:My firmware is the lastest ( .16 version). I "solved" the problem changing the security to "WEP" and the network modem to B/G (no N). The problem did not occurred anymore and i can use all my devices normally but is a little sad have a feature (wireless N) that i can't use...
And a highly insecure wireless network...