Unbricking a wvc54gca [ Edited ]

[richard804]

Does anyone have a link to a program that will unbrick a WVC54GCA?

[great_white]

Let me know the actual concern that you are facing with the WVC54GCA camera? Does it disconnect from the rest of the network? Does it not showing the proper image?

[richard804]

After updating the firmware and resetting the camera to factory, nothing worked not even the blue light. No problem with the power suppy.

[bohochic323]

have you tried reflashing the firmware?

[richard804]

Yes, I tried that.

[stekes]

Did you find a sollution to that? I seem to have the same problem.

It looks "dead" on my case as well

[bgmnt]

I have the very same situation. Mains charger is OK, but the camera doesn't power up, blue led won't came up, nothing happens when i connect it to the wall outlet. There is no support. How can I debrick reflash its firmware? Camera stopped working one day. Does anyone have a step by step tutorial how to disassamble this camera to see whats going on inside? linksys does not give any support for this camera, I called them a few weeks ago. I will not buy linksys camera again. This camera was very good until it stopped working. I am very sad about it. No more linksys product sorry...

[bgmnt]

I disassembled the camera and took some picture from the inside unit. If anyone interested I can publish. My unit is dead. Maybe need to short circuit the chip to reset it, like wrt54g or some routers. Reset button doesn't do anyhing.

[bgmnt]

The LEDs are lights up for 2-3 seconds. There are 4 LEDs inside but only two green LED and the main blue LED is lights up for a few seconds. The mains charger is OK, but the unit is dead. How to repair? Replace a capacitor? Dos anyone know how to repair my cam? I bought it for 150USD and I could use it for 1 year... Thanks Linksys... No warranty, no support.

[thermike]

I have a similar problem. The camera was working but somehow it stopped. When reconnecting power the blue light doesn't light up and I can't connect to the ip address. I tried resetting but nothing happens. Any suggestions?