Re:I Need Firmware Version: v1.1.00 build 02 (wvc54gca)

[Return Privacy]

Hi Maurice,

I finally found a copy of the Firmware v1.1.00 build 02 on a german drivers site. I can email it to you, or you can download it from this link. The link is to the "translated" version of english. This is where I got it, and it worked great. Now my wvc54gca works with all features again. I truly don't know why Linksys Tech Support doesn't put this version back on their site because the new version (v1.1.01 build 01) is bad, and is causing all kinds of problems for people.

I hope this  helps others avoid all the trouble with this camera. This is the fix for wvc54gca problems. Here is the link: (it's long)

http://translate.google.com/translate?hl=en&sl=de&u=http://www.treiberupdate.de/treiber-download/download-182342-treiber-LinkSys-WVC54GCAWireless-G.html&ei=LVZ...

[maurice118]

---

Return Privacy wrote:

Hi Maurice,

I finally found a copy of the Firmware v1.1.00 build 02 on a german drivers site. I can email it to you, or you can download it from this link. The link is to the "translated" version of english. This is where I got it, and it worked great. Now my wvc54gca works with all features again. I truly don't know why Linksys Tech Support doesn't put this version back on their site because the new version (v1.1.01 build 01) is bad, and is causing all kinds of problems for people.

I hope this  helps others avoid all the trouble with this camera. This is the fix for wvc54gca problems. Here is the link: (it's long)

http://translate.google.com/translate?hl=en&sl=de&u=http://www.treiberupdate.de/treiber-download/download-182342-treiber-LinkSys-WVC54GCAWireless-G.html&ei=LVZ...

---

Thanks, btw the link you provided isn't working for me. So I searched the site myself and downloaded it.

I have it now uploaded to my site and the link is http://www.timara.nl/WVC54GCA_FW_1.1.00_build02.zip

I really don't understand why cisco-linksys doesn't keep the old firmwares, so atleast if something is wrong we could go back to an older version.

Maurice

[wuggles]

I am having problems with motion detection with a WVC54GCA that I "upgraded" the firmware to V1.1.01 build 01.     I found that I have the previous V1.1.00 build 02 still on my computer and want to "downgrade"  to this version. I'm a little nervous though as to whether this will go OK. It isn't usual to move back on a firmware version. Has anyone done this successfully? Any problems I should know about?

Thanks,

Mike

[big_lynx]

---

aWombat wrote:

They must've heard you.

New firmware here:

http://www.linksysbycisco.com/US/en/support/WVC54GCA/download

06/15/2009

Ver.1.1.00 build 02

Release Notes:

Version v1.1.00 build 02, Jun 15, 2008
- Support of Setup Wizard is temporarily disabled to address security issue
- Fix security issues
- Fix Camera stability issues
- Fix VLC multicast playback issues
- Update TZO DDNS client
- Change Firmware version format
- Enable HNAP protocol support
- Fix OCX stability issues
- Update valid value range of RTP Data Port. New range is even value of 1024~65514.

---

As this site is not working anymore (or rather the file on this site is not available) could anyone be so kind and point me to a service or email to me *Ver.1.1.00 build 02* of the firmware in question?

Thanks a lot

Cheers,

[ScarletJamie]

---

big_lynx wrote:

---

aWombat wrote:

They must've heard you.

New firmware here:

http://www.linksysbycisco.com/US/en/support/WVC54GCA/download

06/15/2009

Ver.1.1.00 build 02

Release Notes:

Version v1.1.00 build 02, Jun 15, 2008
- Support of Setup Wizard is temporarily disabled to address security issue
- Fix security issues
- Fix Camera stability issues
- Fix VLC multicast playback issues
- Update TZO DDNS client
- Change Firmware version format
- Enable HNAP protocol support
- Fix OCX stability issues
- Update valid value range of RTP Data Port. New range is even value of 1024~65514.

---

As this site is not working anymore (or rather the file on this site is not available) could anyone be so kind and point me to a service or email to me *Ver.1.1.00 build 02* of the firmware in question?

Thanks a lot

Cheers,

---

Hi big_lynx , maurice118 gave this link http://www.timara.nl/WVC54GCA_FW_1.1.00_build02.zi​p.

[gayleard]

Message 22 above gave the URL http://www.timara.nl/WVC54GCA_FW_1.1.00_build02.zip

I just downloaded it from there, but haven't tried installing it.

[vptournier]

Hello,

Thank you for all the good advise posted here. I'm having same problems as most of you and it clearly appears that the 1.1.00 build02 is THE solution, BUT... none of the links provided above seems to work any longer...Am I arriving too late, or would anyone who have this precious file be so kind to post it somewhere, or get in touch with me to send it directly?

Thank you in advance.

[opheliaimmortal23]

I tried it too, it is not working anymore. Looks like the link has been deleted or removed? I tried looking around in the web but could not find anything. I hope the other users with this device and happens to have saved before the firmware from that link will send personally the file as it seems that the file cannot be found anymore for a long time now from Cisco's homesupport site.

[Mediengestalter]

Hello,

i am also in the need for the newest driver for my WVC54GCA.

I have to of 'em running. One w/ firmware V1.00R22 and the other w/ firmware V1.00R24. I noticed, that the R24-Version has the option under "Image" at the bottom of the page under "Options" to check/uncheck "Enable Low Light Sensitivity". The R22-Version does not have this option!

So, i am looking at least for firmware V1.00R24 to use the Low Light Sensitivity on my other cam. If possible i like to upgrade both cams to the latest firmaware.

Unfortunetly under the url http://homesupport.cisco.com/en-us/support/cameras/WVC54GCA/download no driver is available for download.

Does anyone of you can provide me with any firmware version for this great cam?

Thanks in advance!

[ScarletJamie]

---

Mediengestalter wrote:

Hello,

i am also in the need for the newest driver for my WVC54GCA.

I have to of 'em running. One w/ firmware V1.00R22 and the other w/ firmware V1.00R24. I noticed, that the R24-Version has the option under "Image" at the bottom of the page under "Options" to check/uncheck "Enable Low Light Sensitivity". The R22-Version does not have this option!

So, i am looking at least for firmware V1.00R24 to use the Low Light Sensitivity on my other cam. If possible i like to upgrade both cams to the latest firmaware.

Unfortunetly under the url http://homesupport.cisco.com/en-us/support/cameras/WVC54GCA/download no driver is available for download.

Does anyone of you can provide me with any firmware version for this great cam?

Thanks in advance!

---

Hi, you can download the firmware here http://www.gnucitizen.org/blog/hacking-linksys-ip-cameras-pt-5/.

http://downloads.linksysbycisc......00R24.tgz"