Showing results for 
Search instead for 
Do you mean 
Reply
Striker75th
Posts: 1
Registered: ‎02-09-2009

Hooking a Hub to a router.

[ Edited ]

I am currently trying to hook my hub up into my router for the extra needed internet access. Problem is whenever I connect it I get limited or no connectivity. I was curious if I have to change any settings in the router's interface to let it bypass this, or if I am hooking it up wrong.

I am running a cable from port 4 on my router to port 3 on my hub(5 Ports) and the rest are used for computers.

Is this correct?

 


EDIT: I also have a switch that I was trying to hook up the same way but that seemed to not work either. So I thought something needed to be changed in the router's configuration.

Message Edited by Striker75th on 02-09-2009 03:24 PM
Message Edited by Striker75th on 02-09-2009 03:28 PM
Carrot
Posts: 3,271
Registered: ‎09-07-2006

Re: Hooking a Hub to a router.

The actual physical connection should be :

Modem should be connected to the Router on the Internet port, router(from port1) >> hub(on port2) >> computers...You need to provide some additional information like model number of the devices,physical connections between the devices...