Showing results for 
Search instead for 
Do you mean 
Reply
dltn87
Posts: 3
Registered: ‎05-11-2009

WRT54G ver 1.1 Channel Crossing

I have had this model for years and recently it has started to be locked and i am not the one doing it. How do i set up a locked account and a password so taht no one can use my wireless connection?

 

I am on a macbook.

gandalf
Posts: 2,771
Registered: ‎09-06-2006

Re: WRT54G ver 1.1 Channel Crossing

To do this open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...

- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...

Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
dltn87
Posts: 3
Registered: ‎05-11-2009

Re: WRT54G ver 1.1 Channel Crossing

ok i got my macbook to work with this just fine, however now i cannot get my PC's to work. it is connected but i cannot get on the internet.
dltn87
Posts: 3
Registered: ‎05-11-2009

Re: WRT54G ver 1.1 Channel Crossing

it's saying something about the DNS.