06-29-2009 08:33 AM
I am trying to install Network Magic 5.5.
The installation process cannot find my router.
I have power cycled, but I don't think that this is the issue.
Reading the help documentation, it appears that NM requires an IP range of:
10.0.0.1 - 10.254.254.254
172.16.0.1 - 172.31.254.254
192.168.0.1 - 192.168.254.254
However, I currently use 192.212.133.x
This is a personal choice for my own reasons.
Is there any way around the apparent range restriction?
Or am I out of luck?
06-29-2009 07:58 PM
12-27-2009 05:03 PM
I have encountered the same problem when installing the bundled Network Magic basic that came with my WRT610N.
For work reasons, my router needs to be configured with a specific IP address that's within my company's range of IP address. Even though this is a non-standard address for a private network, it works correctly. However, that means that Network Magic is useless to control and monitor my home network.
Since the Linksys router allows me to change its IP address on the private network, then isn't it reasonable to expect that Cisco Network Magic should have a provision for this as well?
12-31-2009 08:48 AM