Showing results for 
Search instead for 
Do you mean 
Reply
RHR
RHR
Posts: 4
Registered: ‎08-14-2007

Match NAS200, WRT54GS and BEFCMU10?

Hello Guys,
 
I have WRT54GS and BEFCMU10 good match (WRT54GS on BEFCMU10).  I have EFG80 not match them...
 
I don't know I buy about NAS200 but same match WRT54GS and BEFCMU10.   if Yes, I will buy it and good-bye EFG80
 
or would i like see picture match NAS200 but I not find website about match NAS200
 
let me know
Thank you
 
RHR
__________________________
ЯHR
gvaughn
Posts: 109
Registered: ‎07-18-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

Hi! What do you mean by EFG80 did not match? They are using the same IP segemnt like 192.168.1.x so that should work. Same thing as NAS200, it should work with your modem and router.
RHR
RHR
Posts: 4
Registered: ‎08-14-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

Hi
No, I not talk about IP address, or software
I need match between WRT54GS/BEFCMU10 on
NAS200,
you know WRT54GS and BEFCMU10 is four hole, WRT54GS put on BEFCMU10.   WRT54GS and BEFCMU10 are friendly,  they on EFG80 becuase EFG80 is longer box than WRTS4GS / BEFCMU10 small boxes
If I buy NAS200, WRT54GS and BEFCMU10 can four hole on NAS200, same size boxes?
 
Dimensions
BEFCMU10 - w7.32 x d1.89 x h6.50
WRT54GS -- w7.32 x d1.89 x h6.06
NAS200 --- 6.69 x 4.49 x 7.60 (not show W / D / H )
 
you see size BEFCMU10/WRT54GS and NAS200 are diffrent size but same size four hole and legs?
 
RHR
 
__________________________
ЯHR
gvaughn
Posts: 109
Registered: ‎07-18-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

Oh I get what you mean. :smileyhappy: The dimension of NAS200 is
(W x H x D)
6.69" x 4.49" x 7.68"
(170 x 114 x 195 mm)

so I don't think they match.

 

RHR
RHR
Posts: 4
Registered: ‎08-14-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

yeah, I worry I buy NAS200 or not that I need MATCH same CASE
 
or some have match and need picture show me
 
RHR
__________________________
ЯHR
RHR
RHR
Posts: 4
Registered: ‎08-14-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

Who have NAS200 and other Linksys Router,
Please give me what model router on NAS200 Please?
 
 
__________________________
ЯHR
psytropic
Posts: 5
Registered: ‎09-18-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

I want to know as well. If I buy this thing I want to stack it under my cable modem and wrt54g router.
DragonsLore
Posts: 226
Registered: ‎07-15-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

Even though the feet of the NAS200 do not match up with other routers/cable modems, you can still make a small stand so you can stack it with the other units.

You can use a flat piece of laminate with feet so it can go on top of the router or fit on top of the NAS200.

What ever you do, you want to make sure there is adequate air flow around the units to prevent any heat related problems.


- Excuse the writing, I've got a Dyslexic Keyboard
Roboto
Posts: 1
Registered: ‎10-17-2007

Re: Match NAS200, WRT54GS and BEFCMU10?

I got the WRT350N. The router sit very nicely on top of NAS200, same size, colour and design. It would be nicer if there is a tray to clamp them together.