WES610N / E2000 do not talk to each other...

[jack520]

I can connect the two if they are physically next to one another, but if I seperate them, I can not connect them. They are about 20 feet apart and will not recognize each other.

What is the secret to get these two to talk to each other when they are more than 6 inches apart?

[brickmonkey]

The wireless Ethernet Bridge and the wireless router should match in order for them to work properly. You must first identify the following wireless settings of your router:

• Wireless Network Name (SSID)

• Wireless Security Mode (WPA/WPA2 Personal or WEP)

• Network Key or Passphrase

Here is the link which will help you in configuring WES610:. http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=22467&userrole=Links...

[jack520]

I have connected the two together a few times.

The problem I have is after a day or two, they do not recognize each other.

Any clues on how to debug?

[jack520]

I highly encourage people to not buy the WES610N.

This device does not work....