04-24-2008 10:09 PM
07-03-2008 03:56 PM
12-01-2008 08:56 PM
01-15-2010 07:13 AM
Hi All !
I think that I've found if not final at leat partial solution to this problem.
I have Leoprad 10.5 and was trying to print on HP DeskJet 920c connected to WPSM54G. Tips I've found on internet suggested setting up the printer using LPD or IPP protocols but the only thing I was able to achieve was 1 (literally "one") guess first print job to be printed.Than the printer wouldn't print anything else - had to switch printserver off and on again.
Luckily I was able to find solution which works for my HP 920c - guess other HP and hopefully other printers too.
After choosing "System Preferences" than "Print & Fax" and "+"mark to add the printer in newly opened printer setup window choose "More Printers" icon at the top than choose "HP IP Printing" - as a matter of fact that was the only option I could choose in my Mac. Than click "Manual", input your WPSM54G IP address and click"Connect" button. Than below IP number you have entered you will see info about your printer that is it's name, kind and address. Click "Add" and you are done. Hope this will help someone
07-20-2011 10:03 PM
Tested on OS 10.4 - 10.6 WPSMG54 Firmware 10.19 with Brother MFC 7420
Create printer and choose
Protocol: Line Printer Daemon
Queue _ip_ip_ip_ip (i.e.. _10_10_10_10)
Select your printer driver
Give it a convenient name
09-30-2011 05:27 PM
I have three macs (2 minis and a macbook pro) running 10.6 and 10.7.
I configured my linksys print server and it prints from all three computers BUT I get a junk page printed out between print jobs. I used the most updated drivers on the computer and I set up the router with a PC laptop but how do I get rid of the junk pages?
They basically say:
" ET ORIENTATION = POTRAIT @PJL SET PAPER= LETTER @ PJL SET PAGE PROTECT = AUTO" etc.