02-12-2011 01:12 PM
I have a Linksys WPS54G wireless print server and a new NetGear N600 WNDR3400 dual wireless router. I am trying to get these connected so I can print wireless. Any assistance is appreciated. Just not sure how to proceed and Linksys says my product is too old for them to offer product support.
02-13-2011 02:02 PM
Connect the WPS to the router with the Ethernet cable. Connect the printer to the print server.
Power cycle the router and the print server. Press and hold the reset button on the print server for 5 seconds and see if you get a print out. On the print out you will find the IP address of the print server. Once you get the IP address of the print server, you can open the setup page of the print server and change the wireless settings.
You can also try to run the setup CD to configure the print server.
Follow this link to setup print server.