05-21-2008 08:24 PM
Solved! Go to Solution.
05-24-2008 05:03 PM
05-30-2008 04:33 AM
05-31-2008 05:52 AM
03-16-2010 02:52 PM
If your router's default Local IP address is 192.168.0.1 (the ip address that is used to login to the router), it will need to be changed in the router settings to 192.168.1.1 . If this is not done before connecting the extender to the router via the ethernet cable, you will not be able to login to the extender.
04-03-2010 07:16 PM
Hey I'm having a problem...
I want to switch my wireless network to a WPA-TKIP security, but whenever I do, my range expander needs to be reconfigured. This would be no problem, except whenever I make the switch, I cannot access the 192.168.1.240 page.
Could this be the type of security?
THIS IS FRUSTRATING
05-22-2010 11:08 AM
Nice guide, I've started getting a message on my windows xp that the ip is used by another computer when I connect the range expander and change the gateway to the ip address of the router!!
Beside after setting up everything, I took the expander a bit away from the router and the signal was really weak, It seems that it is not connecting to it.