10-12-2009 12:36 PM
Is it possible to connect the WRT610N as a bridge between two location?
i.e. I got two physical networks in two offices, I want to install a wireless N access point in both sites to connect them and make them as one logical network.
Will that work?
10-12-2009 04:58 PM
I use a WRT610n bridge im my detached garage to connect to my wireless N router in my house. The bridge is connected to a standalone switch which feeds a pc, NSLU2 and mp3 player.
works just like they said it would....
10-13-2009 03:16 PM
Its not possible to Bridge WRT610N Router using the Linksys Firmware on it. As with the Linksys Firmware you don't have the option to make your Router work as a Bridge or a Repeater. To make your Router work as an bridge you need to install a DD-WRT firmware on your Router. Before you upgrade the firmware check if the DD-WRT firmware is available for your Router.
But if you Upload the DD-WRT firmware on your Router, these will voide the warranty on your Router. If suppose while upgrade the dd-wrt firmware on your Router, and your Router is Bricked then its very hard to make your Router back working again and i doubt that you won't get the any replacement for your Router.
So i would suggest you to get a WET610N, As these device is a Wireless Bridge and it will solve your Purpose.