Reply
jaroth
Posts: 1
Registered: ‎11-06-2008

Linksys SRW224 Serial Port does not respond

I do not get any response from a Linksys SRW224 switch when connected to the management port.  I have tried all baud rates at 8N1.  I cannot log in through the Web interface because I apparently changed the password incorrectly and the Web interface will not accept the new password.  I have read that the way to reset the password is through the serial console, but that is not working.  I have other SRW224 switches that work fine.

 

Stuggi
Posts: 3
Registered: ‎02-26-2009

Re: Linksys SRW224 Serial Port does not respond

Yep, mine doesn't work either, I upgraded it to 1.2.2b firmware (was running 1.0.0.6 before on 0.0.3.1 hardware), and now it doesn't respond to web-interface or serial interface
Kawabunga
Posts: 7
Registered: ‎06-27-2007

Re: Linksys SRW224 Serial Port does not respond

I've have a similar problem with a SRW224P just the console port isn't working. I updated the firmware with 1.0.9 I think it made ZERO difference. I know the cable and settings are good as I double stacked two and could use the console port on the other switch with the same firmware no problem.

 

Nice and reliable for a so called "Business" class switch >:-(

 

-Kawa-
wenmdc
Posts: 1
Registered: ‎11-07-2009

Re: Linksys SRW224 Serial Port does not respond

Hi, I have the same problem - unable to login using Serial Port or Webview

Have you / how did you find the fix? thanks