03-02-2010 05:15 AM
I've bought a Linksys SRW224G4 switch and I have a problem with webview management. I can't use this feature because when I try to open web page, I see "Internet Explorer cannot display the webpage" message. One way to solving this problem is reboot of whole switch, but after some minutes from start to mgmt via web, problem occurs again.
I've read in internet, this problem is known and it's connected to version of IE, it must be 5.5 or 6, not higher. But these information are old (2007, 2008) and I can't believe that this problem is not been solved yet. I'm using IE v.7.0.5730.13
Can You help me?
Some information of my switch:
Boot Version: 1.0.2 (Date: 17-Aug-2006, Time: 14:55:46)
Software Version: 1.2.2b (Date: 20-Mar-2007, Time: 11:44:49)
Hardware Version: 00.03.00
And "SRW224G4 v1.1 business series" information on front pannel.
03-03-2010 04:21 PM
You're correct, it requires to use IE version 5 or higher to access
the web interface of the switch. To further isolate the problem, you may try
different computer also. If you're getting the same problem, you may consider
updating the firmware of the switch. Thanks.