Reply
Posts: 1
Registered: ‎04-23-2008

Problem with SRW2024 http access

At one point I was able to reach this switch via http, I can longer reach it.  I can ping it, console into it but just cant get http access to it.  It has an IP address on our backbone network, which I was able to reach before.   I can also reach it via SNMP.   
 
I have not rebooted it, the only thing I did do was create some vlans and configure a trunk port.  I was able to get to it after that because I had to configure the ports.  All devices on the switch are reachable remotely, so everything is working like it should except for http. 
 
Also telnet/ssh connections get refused eventhough both are enabled. 
 
Any idea what the problem may be? 
Expert
Expert
Posts: 12,649
Registered: ‎07-16-2006

Re: Problem with SRW2024 http access

What happens after a reboot? (power down/up)
Posts: 181
Registered: ‎10-27-2007

Re: Problem with SRW2024 http access

Did you try different computer? Try to check if https is enabled on the switch?
Posts: 2
Registered: ‎05-01-2008

Re: Problem with SRW2024 http access

This is the same issue as described in this thread:
 
 
I am still lookig for a solution other than a reboot.