03-23-2010 01:53 AM
I have a Linksys SPA-3102 at home & plug PSTN cable to Line port.
Currently i can make call from X-Lite to SPA-3102 at office.
Now ! I want to answer all incoming call to PSTN line at home via X-lite.
So could you help me to configuration SPA3102 & X-lite ?
I do not used any Service Provider.
03-24-2010 04:07 PM
I don't think it is possible to do. I'm not sure with the X-Lite configuration. But as far as SPA3102, there's no way to accomplish that.
By the way, you may check this link also for your reference.
03-25-2010 01:49 AM
Thank you for this reply.
I have a question , can i forward incoming PSTN Call to another Softphone ?
Currently I plug telephone cable to FXO port the SPA at home.
I want when people call to my phone number , the SPA Forward Incoming call to Softphone and i Accept Call.
03-28-2010 07:23 AM
The application that you can do on SPA3102 is to forward PSTN call to VoIP. To be able to setup this, you need to know if the VoIP of SPA3102 and SIP server of your softphone are the same. If it is not, then you need to verify this to your VoIP. If they are the same, I would suggest to visit this link .Other info can be found from that site also. Thanks.
03-28-2010 12:30 PM
Thank you for this reply , So i want to install VOIP Server device at home.
and i dont install Voip Server Application ( Asterisk , ...... )
Could you help me to find SIP server hardware for home ?
like SPA3102 for Voice gateway.....