Reply
MooreOrLess
Posts: 3
Registered: ‎04-26-2008

Moved Internationally with RTP300

New ADSL wireless network in France.  The subnet range is different than what I had in the states, and the RTP300's hardcoded IP doesnt fall in the range.
 
RTP300 = 192.168.15.1
 
New network range = 192.168.0.1 - 192.168.0.254
 
I tried resetting the RTP300, but when I connect the telephone a nice man tells me "The Vonage Device has no connectivity".  duh.
 
Any suggestions for connecting and setting the IP address for the new range?
 
 
timecrisis
Posts: 76
Registered: ‎02-22-2008

Re: Moved Internationally with RTP300

Do you mean you have an adsl wireless router connected to the internet/wan port of the rtp300?
MooreOrLess
Posts: 3
Registered: ‎04-26-2008

Re: Moved Internationally with RTP300

Yea.  Got it all working now.
 
When I reset the RTP300, it turned it back to a DHCP router.  I plugged the network card from my laptop into one of the 4 IP ports on the RTP300.  Got a 192.168.1 address and was able to open the web admin page, set the IP address for the new home network (disable the DHCP service) and power cycled.
 
Now the US phone rings in France.  Beautiful.
MooreOrLess
Posts: 3
Registered: ‎04-26-2008

Re: Moved Internationally with RTP300

I meant the RTP300 DCHP service gave me a 192.168.15 address.  Anyway, that did the trick.  It took just about 10 minutes for the phone line to go active.