12-19-2009 02:45 PM
I have my RTP300 configured to use static IP on WAN port, and it works for a couple of days or so, but then resets to DHCP again. Strangely enough it doesn't lose its SIP settings, but it does lose the connection.
Any help would be greately appreciated.
12-20-2009 04:55 PM
Have you tried to reset RTP300 and then re-configure all the settings on it again?
If you have already resetted RTP300 and still the same problem, then i think you need to re-flash the firmware on RTP300.