Showing results for 
Search instead for 
Do you mean 
Reply
Zebra
Posts: 1
Registered: ‎09-01-2006

WAG54GP2 VoIP Setup

Could someone please help me with a detailed setup procedure for VoIP  on the WAG54GP2.

revwild
Posts: 1
Registered: ‎09-03-2006

Re: WAG54GP2 VoIP Setup

Hi,
several people have commented that this link has helped with VOIP setup for WAG54GP2. You will have to substitute in the appropriate information for you VOIP service provider.

http://forums.whirlpool.net.au/forum-replies.cfm?t=550952

note also the discussion on this unit at http://forums.whirlpool.net.au/forum-replies.cfm?t=512264&p=1
VERTIGOCORP
Posts: 3
Registered: ‎12-28-2007

WAG54GP2 VoIP - WHERE TO BUY?

[ Edited ]
Hi, could someone please give me a clue about where to find this equipment (WAG54GP2) in the US (FL), on-line and/or a retailer? Thanks, Vertigo

Message Edited by VERTIGOCORP on 12-28-2007 12:22 PM
mfrater
Posts: 1
Registered: ‎03-03-2010

Re: WAG54GP2 VoIP Setup

Does anyone have any information on the voice-nmm debug interface on the WAG54GP2? I've searched the InterWeb and found almost nothing.

 

The interface is available via the telnet interface on the WAG54GP2. i.e.

 

Router(main)#?
access-list   no access-list   configure   vpn         voice-nmm
exit          help             ?           iflist      interface
ip dhcp       ipcp             parental    ping        reboot
restart       show             saveall     status      traceroute
upgrade

Router(main)#voice-nmm

Voice Context entered. Normal CLI syntax rules do not apply.
Please see NMM reference manual for commands.
Use <exit> to leave this shell


MXP>