Does anyone have any information on a Windows 7 64-bit driver for the Linksys USB200M USB network adapter? I have three of these that I use between various systems and have had no luck at all making them work with the new OS.
I'd also gladly replace the adapters with the USB300M, but am worried about the same issue; any news on Windows 7 support on this as well?
Well not if USB300M will work with Windows 7, As linksys doesn't have the drivers for Windows 7. May be you can try www.ralinktech.com and check if you can find the drivers for your adapter.
The same address has a 64bit Windows 7 driver. In the hardware manager i look for a driver on my computer, Selected a driver from list, used a disk and browsed to the 64 bit driver. Windows complains about it not being sure that the driver is for the device, but the secound choice is working for me.
Thank you very much! I've looked off and on for months but never found the chipset that the USB200M actually uses. This reference driver works beautifully. A shame that the chipset manufacturer has had this driver available for almost a year and Linksys still hasn't published one.
For everyone's use: The chipset is an ASIX AX88772A. You will need to manually choose from a list during installation and pick this chipset. Driver download:
Using the link http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=97, I tried downloading version v3.12.3.2 of the Windows 7 64-bit driver for my USB200M 2.1 adapter and it complains that it is not a Windows 7 driver when i try to install it. Any ideas?
