- last edited on
Does anyone have any information on a Windows 7 64-bit driver for the Linksys USB200M USB network adapter? I have three of these that I use between various systems and have had no luck at all making them work with the new OS.
I'd also gladly replace the adapters with the USB300M, but am worried about the same issue; any news on Windows 7 support on this as well?
Any help would be appreciated!
Solved! Go to Solution.
11-11-2009 09:42 AM
04-03-2010 08:06 AM
I searched very long but I found the solution here in the forum :
The same address has a 64bit Windows 7 driver. In the hardware manager i look for a driver on my computer, Selected a driver from list, used a disk and browsed to the 64 bit driver. Windows complains about it not being sure that the driver is for the device, but the secound choice is working for me.
04-03-2010 08:21 AM - edited 04-03-2010 08:23 AM
Thank you very much! I've looked off and on for months but never found the chipset that the USB200M actually uses. This reference driver works beautifully. A shame that the chipset manufacturer has had this driver available for almost a year and Linksys still hasn't published one.
For everyone's use: The chipset is an ASIX AX88772A. You will need to manually choose from a list during installation and pick this chipset. Driver download:
Thanks again Skanny,
06-08-2010 07:19 PM - edited 06-08-2010 07:24 PM
Using the link http://www.asix.com.tw/download.php?sub=driverdetail&PItemID=97, I tried downloading version v184.108.40.206 of the Windows 7 64-bit driver for my USB200M 2.1 adapter and it complains that it is not a Windows 7 driver when i try to install it. Any ideas?
- last edited on
The v220.127.116.11 driver is the AX88772A/AX88760/AX88772 Windows 7 32-bit driver but not the Windows 7 64-bit driver.
For Windows 7 64-bit driver, please download the v18.104.22.168 driver from the following URL and try it again.
Please visit the following URL for more details about ASIX's USB to LAN family products if necessary. Thanks a lot.
(Mod note: Edited for guideline compliance. Non-public information is not allowed.)
06-12-2010 07:31 AM
Note that Linksys' USB dongles have their own USB VID/PID information so you should get the official release drivers from Linksys directly. FYI.