Posts: 5
Registered: ‎02-28-2008

PCM200 Driver problem on Windows 98

[ Edited ]
Hi, I'm trying to install the PCM200 card in a hitachi laptop running windows 98. I'm able to get the driver installed without error. After rebooting I look in device manager and there is a yellow circle and a exclamation point on the Linksys. When I choose properties, it says:
"The NDIS.VXD, NTKERN.VXD device loader(s) for this device could not load the device driver (Code 2) " 
Any suggestions?
Posts: 3,271
Registered: ‎09-07-2006

Re: PCM200 Driver problem on Windows 98

Might be possible that the Device is not installed properly ... you can click to Update Driver & see if it gets installed properly ... In addition to following the recommended solution, try removing the device from Device Manager, and then running the Add New Hardware wizard from Control Panel.