Showing results for 
Search instead for 
Do you mean 
Reply
rommax2
Posts: 3
Registered: ‎03-17-2010
Accepted Solution

RV042 droping vpn pass trough ?!?

Hello,

 

 I got a Linksys RV042 (It is set as a gateway, Firmware Version: 1.3.12.19-tm) witch I am using for Load Balancing. Two difrent ISP's, one in WAN1 set to obtain ip automaticlly and the other one in WAN2 with static IP adress. Both MTU set to 1492.

 

 On WAN2 I have configured a VPN tunnel to another site where I have a Zywall 10w, witch works fine with no problems.

 

 In the building we have about 30 computers. Some of them are using a software that works thru a vpn connection. This vpn connects ok until one poin when it instanly dopes and it won't connect unless I reboot the Linksys.

 

 The log doesn't say enithing.

 

 I have discovered that when I change the MTU or renew the IP adress the connection dropes.

 

 Is this has to do something with load balancing?

 

 Is it out of memory?

profitshare
Posts: 42
Registered: ‎02-11-2010

Re: RV042 droping vpn pass trough ?!?

Reset might helps but you need to reconfigure everything.

reflash the firmware.

 

Hoep this helps.

rommax2
Posts: 3
Registered: ‎03-17-2010

Re: RV042 droping vpn pass trough ?!?

I have done that 3 days ago an it sims to be stable now.
rommax2
Posts: 3
Registered: ‎03-17-2010

Re: RV042 droping vpn pass trough ?!?

I' ll take tha back, it just rebooted by it's self.

 

Enyoane ?