Reply
chengone
Posts: 7
Registered: ‎04-27-2008

RVS4000 set up vpn client quickvpn

I would like to hear from someone who was able to setup quickvpn to work with RVS4000.  Please provide detail steps instructions. 
 
Thank you
 
 
gvaughn
Posts: 109
Registered: ‎07-18-2007

Re: RVS4000 set up vpn client quickvpn

Step 1:  Create username and password under VPN clients account in your RVS4000. Make sure that it shows active under VPN client's List Table.
 
Step 2: Take note of your internet IP address, can be seen in the router's status page.
 
Step 3: Install the QVPN software from the remote computer (make sure that your using the latest software - can be download from Linksys website)
 
Step 4: Make sure that all firewall software or build-in firewall are disable from the remote pc
 
Step 5: Launch the QVPN and enter all necessary information like the profile name, username and password, Server IP address (this is the Internet IP from your RVS4000 router), and set to auto.
 
note: make sure that the RVS4000 is not behind another router like a modem router device because it make block the VPN ports.
chengone
Posts: 7
Registered: ‎04-27-2008

Re: RVS4000 set up vpn client quickvpn

Those are the steps I took. I got the message from vpn log "failed to ping remote dns" when it get stuck at "verifing network...".
gvaughn
Posts: 109
Registered: ‎07-18-2007

Re: RVS4000 set up vpn client quickvpn

Enable MTU on the router and set the value to 1453.  (administration tab or setup tab)
Disable Block WAN request  (firewall tab)
Make sure that there's domain name entered in the domain name field in the setup page
lookingbothways
Posts: 3
Registered: ‎04-30-2008

Re: RVS4000 set up vpn client quickvpn

What version of QuickVPN are you using?
chengone
Posts: 7
Registered: ‎04-27-2008

Re: RVS4000 set up vpn client quickvpn

I was using their latest version downloaded online. 1.2.8
gvaughn
Posts: 109
Registered: ‎07-18-2007

Re: RVS4000 set up vpn client quickvpn

Try connecting in a different location to isolate the problem.
chengone
Posts: 7
Registered: ‎04-27-2008

Re: RVS4000 set up vpn client quickvpn

I connected the WAN  of RVS4000 to WRT54G Lan port. and connect from a pc that was on WRT54G's Lan port. that did not work. I also try connecting from dsl line, that did not work either.
sept203
Posts: 88
Registered: ‎07-18-2007

Re: RVS4000 set up vpn client quickvpn

Is your RVS4000 behind another router? If that is the case it's a double NAT and that is the reason why it's not working.
chengone
Posts: 7
Registered: ‎04-27-2008

Re: RVS4000 set up vpn client quickvpn

The way I have it setup.  It is not behind another router.  Do you have an RVS4000? If you do, do you have working with QuickVPN?