Reply
camorimd
Posts: 1
Registered: ‎10-11-2011

Thomsom speedTouch Chained to Cisco 861

Hi,

 

I'm trying to create a VPN through a Cisco 861 but the problem is that the ISP forces me to use a SpeedTouch gateway ( as they use the MAC address for the authentication).

 

What I would like to have is:

 

    Speedtouch ( LAN: 192.168.254.1) <-->  (WAN: 192.168.254.10) Cisco 861 (LAN: 192.168.7.1 with DHCP) <--> Clients.

 

By now, i'm getting OK pinging from client to 192.168.254.1, but I can't reach Internet.

If I connect the client directly to the Speedtouch internet works properly.

 

The wan configuration from the cisco is:

 

interface FastEthernet4

 description $ES_WAN$$FW_OUTSIDE$

 ip address 192.168.254.10 255.255.255.0

 no ip redirects

 no ip unreachables

 no ip proxy-arp

 ip flow ingress

 ip nat outside

 ip virtual-reassembly

 duplex auto

 speed auto

 crypto map VPN_MAP_1

!

 

I would appreciate any clue on getting that configuration.

Administrator
24JUAN80
Posts: 1,649
Registered: ‎04-06-2010

Re: Thomsom speedTouch Chained to Cisco 861

Hi camorimd and welcome to the Cisco Home Community!
The Cisco 861 is handled by the Cisco Small Business Support Community.
For discussions about this product, please go here.
https://supportforums.cisco.com/community/netpro/small-business

------------------------------------------------------------------------------------
The Search Function is your friend.... and Google too.

How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router
------------------------------------------------------------------------------------