Reply
Bane999
Posts: 1
Registered: ‎11-21-2006

WMP54Gv4.exe Error

Hey guys Im running a WMP54G - Wireless-G PCI Adapter and it works great most of the time but everytime I shut down or start up my computer I get the following error:

Window name: WMP54Gv4.exe - Application Error
Window contents:
The instruction at "0x029c1611" referenced memory at "0x028c1611".
The memory could not be "read".
Click on OK to terminate the program
Click on CANCEL to debug the program

I dont want to start randomly uninstalling and re-installing drivers and applications and making it worse seeing as how it works fine while the computer is loaded up and running so I figured I'd ask here first.

Any help would be appreciated.
Posts: 125
Registered: ‎07-13-2006

Re: WMP54Gv4.exe Error

 
Hi,
 
The problem is the software which came from linksys.  Its the software that is for the wireless connection, u can unininstall that one softwar and remain only the drivers for your wmp54gs if your computer is on XP.
LOUIE
Posts: 1
Registered: ‎08-25-2007

Re: WMP54Gv4.exe Error

SOLUTION FOR POWERING DOWN, RESTARTING OR LOGGING OFF WINDOWS XP HOME EDITION AND ENCOUNTERING A WINDOWS ERROR THAT STATES:
 
WMP54Gv4.EXE - APPLICATION ERROR
THE INSTRUCTION AT "0x0******** REFERENCED MEMORY AT "0x0********". THE MEMORY COULD NOT BE "READ".
 
CLICK ON OK TO TERMINATE PROGRAM
CLICK ON CANCEL TO DEBUG THE PROGRAM
 
IS...
 
SIMPLY BY FIRST INSTALLING THE SOFTWARE THAT WAS IN THE LINKSYSTEMS PACKAGE.
THEN LOGGING ON TO LINKSYSTEMS AFTER YOU HAVE MADE A CONNECTION.
LOGGING ON TO LINKSYS.
CLICKING DOWNLOADS.
ENTERING THE PRODUCT NAME.
VERIFYING THE VERSION OF YOUR PRODUCT. 
DOWNLOAD THE DRIVER OF YOUR PRODUCT AND SAVING A COPY TO YOUR DESKTOP. 
LOGGING OUT OF LINKSYS AND CLOSING ALL WINDOWS.
REMOVE THE INSTALLED LINKSYS FROM YOUR CD IN CONTROL PANEL. RESTART THE COMPUTER.
AS YOU LOG ONTO WINDOWS AGAIN. 
FIND THE DRIVER FILE YOU SAVED FROM THE LINKSYSTEMS WEBSITE AND CLICK.
CLICK THE BROWSE BUTTON AND SELECT DRIVE C:/ FOR DESTINATION OF UNZIPPED FILES.
UNZIP THE FILE.
ONCE FILE IS UNZIPPED, CLOSE THE DRIVER DOWNLOAD.
CLICK ON START; MY COMPUTER; THEN LOCAL DISK C:/
AFTER YOU LOCATED THE WMP54GV* FILE, OPEN THE FOLDER.
YOU WILL SEE THE SETUP WIZARD FOR LINKSYSTEMS.
DO NOT DOWNLOAD THIS FILE. COMPLETELY IGNORE.
OPEN THE UTILITY FOLDER.
CLICK ON THE SETUP (SETUP LAUNCHER)
ALLOW A MINUTE FOR THE DIALER TO APPEAR IN THE SYTEMS TRAY.
CLOSE ALL WINDOWS.
RIGHT CLICK ON THE DIALER IN THE SYTEMS TRAY.
OPEN NETWORK CONNECTIONS
RIGHT CLICK ON YOUR WIRELESS NETWORK
CLICK ON PROPERTIES
CLIK ON THE WIRELESS NETWORK TAB
GO TO THE PREFERRED NETWORK MENU AND ADD A NETWORK
ON THE ASSOCIATION TAB ADD THE SSID TO YOUR WIRELESS GATEWAY
IN THE WIRELESS NETWORK KEY MENU FIND NETWORK AUTHENTICATION AND SET TO OPEN
THEN SET THE DATA ENCRYPTION TO DISABLED
OKAY ALL WINDOWS AND APPLY NECESSARY CHANGES AND WITHIN ONE MINUTE YOU WILL HAVE PACKET SWITCHING AND CONNECTION AVAILABLE.
 
THIS IS THE ULTIMATE SOLUTION FOR TIS PROBLEM. HPE I COULD BE OF HELP.
      LOUIE "THE FREQ" VIRAMONTES