Disabling wireless for M10

[dirtdan]

I want to use the Valet M10 wired only.

Is this how I should do it ??

-Valet settings

-Advanced Settings

-Wireless

-Configuration view.......click on manual

-Network mode........click on Disable

[jaymay]

It should be the SSID Broadcast that should be Disabled.

[forsaken · Accepted solution]

You have to try the following combination of settings:-

A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)

          1] Open the software and go to the option which says "Router Settings"

          2] Then click on the option which says "Advanced Settings" which will take you to the gateways configuration page.

         3] Click on the wireless tab and select manual.

         4] Select Wireless Network mode as disabled.

B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the user name field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

[dirtdan]

.

forsaken, method A)..worked perfectly.

Thanks guys