Showing results for 
Search instead for 
Do you mean 
Reply
linux00v00
Posts: 3
Registered: ‎06-14-2010

Cannot Access to my router

[ Edited ]

Hi,

I have linksys WAG120N model with 20.0.0.20\24 LAN IP and i  connected  it with SpeedTouch 510 dsl router(IP 10.0.0.138) that act as gateway to internet , i have configure 1st ethernet port on my linksys asWan with static ip 10.0.0.100\24 ,10.0.0.138 G.W & configure DHCP in it, the problem that i can't access to my linksys web interface (ip 20.0.0.20 or 10.0.0.100)via 10.0.0.0 network.

 

jaymay
Posts: 1,830
Registered: ‎04-22-2012

Re: Cannot Access to my router

Since your SpeedTouch 510 dsl router’s IP is 10.0.0.138, you should not setup the WAG120N with the same range since they will conflict. The WAG120N should be setup to another IP range. By the way, what is your internet connection type from your modem/ISP – is it dynamic, Static or PPPoE? And is there a computer that can get online behind the WAG120N?

linux00v00
Posts: 3
Registered: ‎06-14-2010

Re: Cannot Access to my router

Thanks for your attention

As per my topology below my problem is i can't access web interface to my linksys (10.0.0.100/24) via 10.0.0.5 or 10.0.0.6

i can be access to  via 20.0.0.105/24 only  ِِathough ping working good to both linksys IPs(10.0.0.100,20.0.0.20),and i can access to 10.0.0.138 form 20.0.0.105. iam totally confused .what is the problem .

 

My TOPOLOGY.JPG

jaymay
Posts: 1,830
Registered: ‎04-22-2012

Re: Cannot Access to my router

Do you want to extend your network using the WAG120N acting as a router only? There are two ways in cascading the WAG120N to your SpeedTouch dsl router – LAN-LAN cascade and LAN-WAN cascade. LAN-LAN cascade is recommended if you want to share files and resources within your network since both your dsl router and the WAG120N will have the same range of IP. LAN-WAN cascade is configuring the WAG120N with a different range of IP. This means that you will have two different networks (one from the dsl router and the other one from the WAG120N). This link will give you more information about cascading two routers: Cascading (Connecting) a Linksys router to another router.