10-17-2012 01:52 PM
I have a WRT160N that I've been using with my HDTV for months. Now I want to connect a BluRay player to it, but the setup requires me to enter a security code, and the one I had for the router doesn't work. Can I change the number, or at least double-check the number I do have?
10-17-2012 06:05 PM
Well, downloading the manual, it says to go to 192.168.1.1 username blank, password 'admin' (unless you changed it). Now find the wireless tab and search for your security information.
10-17-2012 09:06 PM
Hi you may access the router interface by using a computer that is currently connected to the network (wired or wireless). Open a browser and type in 192.168.1.1 (if that is the gateway address). It will prompt for a Username and Password. Leave the username blank and type in "admin" for the password. Then go to the wireless tab and look for wireless security on the sub-tab. If you cannot access it using the default username and password, you need to reset the router.
For more detailed instructions, please click the link below.