02-13-2011 08:02 PM - last edited on 02-14-2011 03:12 AM by OnnagokorO
Ughhhh.. I just want this router to work.
I already did the thing with the MTU where you find your max MTU then add 28.
I set it as 20mhz only on channel 11.
Beacon Interval 75
RTS and Fragmenting threshold to 2304
I've tried enabled and disabled UPnP.. I have to have it enabled for 360 and PS3..
I get speeds. I have a 30mb/s down and 1mb/s up line... But I'm lucky to download at 800kb/s on sites that should be much higher... (that were the same day I got my new linksys router) PlayStation Network speeds are horrible and XBL speeds.
speedtest.net shows 2mb/s down instead of the 25+ it shows with a router that doesn't.
02-13-2011 08:58 PM - last edited on 02-14-2011 03:13 AM by OnnagokorO
Also, I've done full power cycles.. everythng.
The entire E series seems to be .. Just look around the forums...
I had my 13 year old Linksys router for 13 years... WORKED PERFECT... The day I got this.. nothing but problems.
(Mod note: Edited for forums compliance.)
02-14-2011 03:15 PM
As you have tried all the settings on your Router and still you are facing the same problem, then i think you should reset your router and then re-configure all the settings on it from scratch. If that still doesn't solves your problem then try to re-flash the firmware on your Router and then check the speed on your computers.