Showing results for 
Search instead for 
Do you mean 
Reply
mgerbasio
Posts: 1
Registered: ‎11-13-2011

E4200 Upgrade 1.0.03 Stuck at 98%

Hi,

I downloaded the firmware from the Linksys site. I'm using IE v9 on a Win7 Pro x32. I'm using the E4200 as an access point so DHCP is disabled, no cable in the WAN port.

 

I uploaded the firmware but it seems to be stuck for 30 minutes at 98%. I read some threads saying it takes a while, but I'm not sure if it is locked up. The screen says not to interrupt the process so I don't want to reboot/reset and brick the router.

 

Should I just keep waiting?

 

Regards-Michael G.

Expert
sabretooth
Posts: 5,329
Registered: ‎11-11-2008

Re: E4200 Upgrade 1.0.03 Stuck at 98%

You are connected via a LAN port with a cable to your PC when you started the firmware update correct?

bohochic323
Posts: 428
Registered: ‎10-31-2011

Re: E4200 Upgrade 1.0.03 Stuck at 98%

give it a few more minutes... it's always best to connect your router to the computer via Ethernet cable for uninterrupted upgrade process. 

"Don't fix it if it ain't broken."