02-23-2012 04:17 PM
My router: WRT160Nv3
My Firmware Version: v3.0.02
Upgrade version: Ver.3.0.03 Build 3
I can not upgrade, always gives the same error message:
Firmware upgrade failed!
I do not know what to do, does anyone have any tips to help me?
02-26-2012 09:57 AM
My thanks for the help but I confess that I am not succeeding.
What would be or what would be my server and my password?
I tried several things but I could not install, and reset the router, reinstalled and still unable to update it.
Where am I wrong?
02-26-2012 10:03 AM
Have you tried performing a hard reset first or trying a diff brower during flashing!?
02-27-2012 08:32 AM
If you are upgrading the firmware of the router through TFTP utility, then the server will be the IP aaddress of the router and the password will be the password for login into the router management page. Here is the link upgrading the router’s firmware using the TFTP utility: http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&logi
Before upgrading the firmware of your router, your computer must have an active Internet connection to download the firmware file. Once the firmware is downloaded, you can proceed with the firmware upgrade even without Internet connection.
Here is the link for upgrading the firmware via router setup page: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=