Posts: 2
Registered: ‎10-04-2007

How do I add a password to my wireless network

First time posting to the board.  So, in advance, thanks for you time and help.  I am a computer idiot..not proud just realistic.  I have read other posts and I just get lost in them as I do not have a strong working knwledge of computer knowledge.  So, after reading on the linksys help pages, I have become even more confused.  Basically what I need help with is just adding a password to my wireless network so the laptops in my house are the only ones that can use it.  Probably a very basic question, but any help would be greatly welcomed. 
Posts: 2
Registered: ‎10-04-2007

Re: How do I add a password to my wireless network

I probably should add that I'm on Vista using the Linksys wrt54g router
Posts: 6,365
Registered: ‎09-16-2006

Re: How do I add a password to my wireless network

To set up wireless security, you must use a computer that is wired to the router.

Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" section of the router's setup pages, located at

First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".

Next, leave the router at its default settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.

To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.

Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:

WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best

WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).

The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.

Retest your system and verify that your wireless Internet connection is still working correctly.

And don't forget to give your router a new login password.

Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.

Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.

One additional issue is that Windows XP requires a patch to run WPA2. Go to Microsoft Knowledge base, article ID=893357 and it will direct you to the patch.
Sadly, the patch is not part of the automatic Windows XP updates, so lots of people are missing the patch.

WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.
Posts: 1
Registered: ‎08-27-2016

Re: How do I add a password to my wireless network

how do I create a password for my guest network
Posts: 909
Registered: ‎06-12-2016

Re: How do I add a password to my wireless network

Hi, Soulo62. You can use this link as your guide on how to add a password for the Guest Access network of your Linksys router using the local interface. Keep us posted if you have any questions.

Linksys Technical Support
Posts: 1
Registered: ‎02-05-2018

Re: How do I add a password to my wireless network