Showing results for 
Search instead for 
Do you mean 
Reply
Gagnon21
Posts: 1
Registered: ‎02-17-2008

How to change NAT to Open (Wireless)?

I have a v1 WRT54GS And I am currently fustrated. After anouther laptop coming into this house my Xbox Live Functions have locked up from the NAT turning to Moderate. Now I have tried many things to change it but nothing seems to work. I am using the Microsft Wireless Adapter for the 360. Thank You for your time
Klatch
Posts: 2,829
Registered: ‎09-07-2006

Re: How to change NAT to Open (Wireless)?

Access Router set up page .....
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox..from the status page of router ....
6)  Change the MTU size from auto (1500) to 1365 ..... click save settings ....
  7) Please try to test your xbox live.
 
h3guy
Posts: 2
Registered: ‎06-27-2008

Re: How to change NAT to Open (Wireless)?

i have done all that you posted and when i tested my xbox live i still got NAT type to be moderate.  Any other suggestions?
adriancjones
Posts: 1
Registered: ‎01-30-2010

Re: How to change NAT to Open (Wireless)?

I did every step except for the last one and it didn't work.  Then I went back and did the MTU step and it worked.  Thanks 
Lifted
Posts: 1
Registered: ‎05-05-2011

Re: How to change NAT to Open (Wireless)?

where do you go to do step 5?
killerklapaucius
Posts: 8
Registered: ‎05-04-2011

Re: How to change NAT to Open (Wireless)?

that would be on your xbox

phudabulah
Posts: 1
Registered: ‎09-30-2011

Re: How to change NAT to Open (Wireless)?

Thank you!  This worked!  I tried following many other walkthroughs online, even called my ISP (who wasn't a lot of help... telling me to look it up online), and yours was very simple and it worked.  Thanks mang.

Hawkstar
Posts: 1
Registered: ‎10-19-2011

Re: How to change NAT to Open (Wireless)?

If you turn off your UPNP won't you lose connection to the internet? Or it doesn't do that at all? I just need help with the last couple steps from disabling the UPNP

jessssssbabe
Posts: 1
Registered: ‎03-13-2012

Re: How to change NAT to Open (Wireless)?

how do you change the mtu size? it doesnt give me an option to change it

macstian
Posts: 1
Registered: ‎04-02-2012

Re: How to change NAT to Open (Wireless)?

MTU: Setup < Basic Setup