Showing results for 
Search instead for 
Do you mean 
Reply
m4ch0
Posts: 1
Registered: ‎07-18-2006

How to set private static ip in wan?

Hi,
Need help to connect my wireless linksys WRT54G with my existing Aztech 600E modem/router.
 
Aztech lan ip: 192.168.1.1 connected and works perfectly.
DHCP disabled.
 
The problem is I want to add wireless to my network so i purchase Linksys WRT54G.
Linksys lan ip : 192.168.1.5
DHCP enabled.
 
My idea is to use the aztech as the modem and connect the rest to the linksys as the main router.
 
When i tried to set the wan static ip(which is the internet ip on the basic setup area) it says that wan ip cannot be the same as lan ip.
(previously i could do it with dlink wireless router)
 
Question is how do it set the wan ip with a private ip?
 
Maybe my idea is wrong, any suggestions? How can I go about it?
 
Thanks
 
 
 
 
 
Katsuki23
Posts: 211
Registered: ‎06-29-2006

Re: How to set private static ip in wan?

Change the LAN IP of the router then try that static IP again. Use 192.168.5.1 for the router.

"When you have eliminated the impossible, whatever remains, however improbable, must be the truth."