Reply
bcow
Posts: 2
Registered: ‎08-23-2006

How to setup a Class B network with WRT54GX ver. 2

Hi all,
 
I bought a WRT54GX ver. 2 router. I wanna know how to setup the IP address say 128.1.50.136 with subnet mask 255.255.0.0 (Class B network)? By the way, 128.1.0.0 is my network zone.
 
If the router can't change, what should I do? Any other router support Class B network?
 
 
Thanks!
 
Posts: 126
Registered: ‎08-19-2006

Re: How to setup a Class B network with WRT54GX ver. 2

You can access the setup page of the router and change the local IP address of the router to the desired IP and subnet.
bcow
Posts: 2
Registered: ‎08-23-2006

Re: How to setup a Class B network with WRT54GX ver. 2

I did but it doesn't work. It seems don't have 255.255.0.0 to select.
 
would you state more clear of how to do it? Thanks!
neighbour_devil
Posts: 325
Registered: ‎08-07-2006

Re: How to setup a Class B network with WRT54GX ver. 2

I've not been able to do what you are trying bcow
ARCHANGEL_06
Posts: 516
Registered: ‎06-28-2006

Re: How to setup a Class B network with WRT54GX ver. 2



bcow wrote:
I did but it doesn't work. It seems don't have 255.255.0.0 to select.
 
would you state more clear of how to do it? Thanks!


It does not have that because it does not support it... the router runs on CLASS C only because it was designed and made for SOHO only... bussiness lines of Linksys or Cisco can do that....but not this router...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06